DCS # | DEMONSTRATION | REFERENCE | ABSTRACT |
5J20.00 | LR Circuits | | |
5J20.10 | RL time constant on scope | PIRA 200 | Show the RL time constant on a scope. |
5J20.10 | LR time constant on scope | 5J20.10 | The current and voltage of an slow time constant LR circuit are displayed on a dual trace storage oscilloscope. |
5J20.10 | L/R time constant | Eo-11 | A plug in circuit board with a make before break switch for showing slow RL time constants on the oscilloscope. |
5J20.10 | RL time constant | En-6 | The RL time constant is shown on a scope. |
5J20.11 | time constant of an inductive cir. | En-7 | Compare the time constant of an inductor using different cores on an oscilloscope. |
5J20.20 | lamps in series or parallel with ind. | PIRA 200 | Hook light bulbs in series with a large electromagnet. |
5J20.20 | current in an inductive circuit | En-5 | Light bulbs across and in series with a large electromagnet show the current in an inductive circuit. |
5J20.20 | lamps in series and parallel on EM | 31-3.5 | Two lamps are used to indicate voltage across and current through a large electromagnet. |
5J20.20 | series lamps on an EM | E-12c | Light bulbs are hooked up in series with a large electromagnet. |
5J20.20 | lamps in parallel with solenoid | Disc 21-03 | Apply
110 V to a large solenoid with incandescent and neon lamps in parallel. The
neon lamp flashes on the opposite side on discharge. |
5J20.21 | lights in series and parallel | 31-3.1 | A circuit with a 5 H inductor has neon lamps in series and in parallel. |
5J20.25 | inductor characteristics | 33-5.1 | A bulb in parallel with a coil does not burn when powered by dc, but does when coupled to a high frequency source. |
5J20.30 | LR time constant | E-257 | Substitute a inductor and resistor of the same R in a circuit that lights a neon bulb. |