DCS # | DEMONSTRATION | REFERENCE | ABSTRACT |
9C25.00 | Vacuum | | |
9C25.10 | high vacuum system | AJP 36(3),234 | Design of a high vacuum system suitable for lecture demonstration. |
9C25.10 | movable vacuum system | 16-6.1 | Pictures of a movable vacuum system good to high vacuum. Construction Details in the Appendix, p 610. |
9C25.10 | vacuum system | A-57 | Construction of a portable high vacuum system. |
9C25.15 | vacuum lore | AJP 32(7),vi | Let in only dry gas or heat traps to 100 C to reduce water contamination. |
9C25.15 | liquid nitrogen cold trap | AJP 37(1),109 | Mount a styrofoam bucket on top of a minimum sized reentrant can-type trap. |
9C25.20 | Bayard-Alpert type ionization gauge | AJP 30(8),v | A
single device contains a titanium vapor pump that consists of a titanium
filament depositing a film on the wall to act as a getter, and a Bayard-Alpert
type ionization gauge. |
9C25.20 | power supply for Penning vacuum gage | AJP 32(6),504 | Schematic diagram for a Penning vacuum gauge power supply. |
9C25.20 | homemade high vacuum techniques | AJP 32(6),483 | Make experimental vacuum tubes with solder glass, mass produced headers, and multiple gettering. |
9C25.25 | thin films of dielectrics and metals | AJP 28(7),654 | Directions
for making a transparent aluminum oxide film on a front surface mirror. The
interference colors of the mirror and glass sides are complementary. A parallelogram
frame permits demonstrating the change of color with angle of incidence.
More. |
9C25.26 | vacuum deposition system | M-21b | A picture of a vacuum deposition system. |
9C25.30 | vacuum tube construction kit | AJP 28(6),xii | The Physikit 100A from Harries Microphysics contains parts to make several tubes. |
9C25.40 | high vacuum epoxy joints | AJP 29(10),xiii | From J. Sci. Instr. 37,203 (1960): Techniques for making successful high vacuum joints with epoxy resin. |
9C25.40 | vacuum lines and connections | AJP 36(5),viii | Use thermoplastic polyethylene tubing and connectors with vacuum grease. |
9C25.40 | cheap vacuum fittings | AJP 32(4),xv | Standard plumbing "Flex Fittings" from Imperial-Eastman work very well as vacuum connectors. |
9C25.40 | vacuum apparatus | AJP 31(4),xiii | Use Pyrex brand pipe and fittings for student high vacuum experiments. |
9C25.41 | vacuum feed through | AJP 35(11),ix | Just use a spark plug. |
9C25.41 | vacuum electrical feed-throughs | AJP 33(4),xxvi | High vacuum electrical lead-throughs good to 6000 V and up to 5/16 in diameter conductor. |
9C25.41 | vacuum electrical feed through | AJP 40(10),1550 | Use an automobile spark plug. |
9C25.45 | vacuum seal | AJP 35(7),iv | Use teflon tape. |